Unit 600 Wet Ring Aspiration with Amalgam Separator BADER®️ DENTAL

The suction unit is designed to generate vacuum for the suction of saliva, rinse water and other fluids.

One of our most interesting products for your Dental Clinic since it has a large suction capacity and is valid for two or three units.

Buy
SKU: 09070074

Description

Wet Ring Aspiration with Amalgam Separator

Wet Ring Vacuum Unit 600

VS is the abbreviation for VACUUM AND SEPARATION units. VS suction units are called wet systems because the suction and separation for the entire practice is performed centrally on one suction machine.

The suction unit is designed to generate a vacuum for the suction of saliva, rinse water and other fluids, which are produced in a dental practice during treatment, and which will be led to the drain.

Integrated ventilation nozzle ensures maximum constant suction capacity.

It incorporates a sealed suction chamber, which avoids infection by bacteria.

Sound level 58 dB, therefore it can be installed in small dental clinics without worrying about disturbing its sound.

High quality electric motor, continuous duty operation, rotation speed 2900 rpm.

Features of Wet Ring Suction with Separator:

  • Maximum liquid flow rate 3.9 l/min. in surgical suction cannulae
  • Central suction machine for 2 workplaces
  • No drainage required at the base of the dental unit
  • Air/water separation is produced by suction
  • Single central drain in the engine room

Technical data:

  • Two to three jobs
  • Suction flow rate: 500L/m
  • Number of positions with 60 % alternation: 3 positions with 2 simultaneous jobs
  • Sound level: 58 dBA
  • With solids separator
  • Electrical output (kW) 0.58 - 0.68
  • Voltage (V) 230 (1~)
  • Frequency (Hz) 50
  • With electronic control unit
  • Maximum depression: -39KPa
  • Rotation speed: 2900 R.P.M.
  • Size: 40cm x 47cm x 58cm
  • Weight: 28kg

Separated Amalgam Filter

This amalgam filter separator is designed for use in conjunction with the Unit 600 wet ring suction unit.

It is not an electrical product and therefore does not require any type of power supply.

It is easy to install, for which several accessories are included to adapt to each type of installation.

You can analyze the technical data:

Dimensions:

  • Height: 44 cm
  • Diameter: 25 cm

Supplied with all necessary accessories

  • Two meters of hose
  • Four hose clips

Separation efficiency: 96.5%.

Efficiency at maximum flow rate: 96.3%.

The main features are:

  • Approval: EN ISO11143:2002-12
  • 100% recyclable
  • Easy to adjust
  • Small and compact
  • No maintenance required
  • No operating expenses
  • Quiet
  • Up to two years of use without needing to be recycled