Description

Sand Plus Bracket Conditioner

It is a sandblaster for new brackets that increases 18% its fixation and also allows reconditioning metal and ceramic brackets. It contains a grip rod for 4 new or used brackets.

Characteristics:

• Modern and ergonomic design.
• Cleans and reconditions metal and ceramic brackets without loss of quality.
• It has a hermetic abrasion system.
• Working pressure of 3,4/6,2 Bar
• Reuse of aluminum oxide.
• Measurements:
  - Height: 17cm.
  - Width: 19cm.
  - Length: 16,5cm.
• Weight: 0,80Kg.

Utilization:

1. Connect the equipment to the air network.
2. Place a thin layer of wax in the hollow area of the stem.
3. Attach the bracket to the wax on the area.
4. Operate the button for the time required to clean the part, 10-25 seconds, moving the rod to the right and left during the process.
5. Remove the bracket.

Maintenance:

1. Use aluminum oxide between 90 and 125 microns/indicated use of the air filter.
2. Clean the rust filter and change it whenever it is dirty (according to the time of use).
3. Turn the valve OFF every time you stop using the bracket recycler.
4. Never immerse the device in water, use a damp cloth.

REF. 09070041