Description

Pneumatic dental laboratory turbine for micromotor

• The design of the laboratory turbine is attractive and elegant, making it simple to use and easy to transport.
• Installation is simple and the machine can start working immediately after being connected to the air source.
• The machine head has a dust-proof design that ensures a long service life.
• The machine operates at a high speed with minimal fluctuation, making it easy to operate and highly efficient.
• Its ergonomic design provides a comfortable and logical operation, making it easy to use.

Technology associated with the turbine with micromotor:

Special anti-dust mechanism

The turbine is equipped with an anti-dust system, which prevents debris from entering the bearings.

Easy tank removal

Removal of the water container is simple and convenient.

It can operate autonomously with its own integrated water container or be connected to the water supply network.

Water cooling options

The dental lab turbine offers adjustable water cooling options, ranging from small droplets to a fine water/air mist. These independent settings make it possible to adapt the working conditions for different materials, from minimizing microcracks to rinsing residues during cutting.

Technical characteristics of the laboratory turbine:

• Working air pressure: 0.2-0.4Mpa;
• Maximum speed: 400000r/min;
• Machine air access: 8mm;
• Handle access: quick connection.

How to use a dental laboratory pneumatic turbine:

1. Place the machine in a stable position before use and connect it to a suitable air source.
2. Set the pressure regulating valve to the air pressure required by the technical parameters.
3. Unscrew the water bottle.
4. Add water into the bottle, put the water bottle in place, rotate it, press it up in the correct position.
5. Connect the turbine through the quick coupling and insert the tip.
6. Turn on the cooling water switch and set to the appropriate position.