Unit 300 Wet Ring Suction and Amalgam Separator Filter BADER®️ DENTAL
The suction unit is designed to generate a vacuum for the suction of saliva, rinse water and other fluids, which are produced in a dental practice during treatment, and which will be led to the drain.
The amalgam separator filter is designed to work in conjunction with the Unit 300 wet ring aspirator.
Both products together present the perfect solution for the suction of all types of fluids and at the same time filtration and separation of amalgam.
- Description
Description
Wet Ring Suction and Filter Separator
Wet Ring Unit Unit 300
VS is the abbreviation used to designate VACUUM AND SEPARATION units. VS suction units are called wet systems because the suction and separation for the entire practice is performed centrally on one suction machine.
The suction unit is designed to generate a vacuum for the suction of saliva, rinse water and other fluids, which are produced in a dental practice during treatment, and which will be led to the drain.
Integrated ventilation nozzle ensures maximum constant suction capacity.
It incorporates a sealed suction chamber, which avoids infection by bacteria.
High quality electric motor, continuous duty operation, rotation speed 2900 rpm.
The characteristics of our product are:
- Its maximum liquid flow rate 4 l/min. in the surgical suction cannula.
- The central suction machine for one workstation
- No drainage required at the base of the dental unit
- Air/water separation is produced by suction
- It has a single central drain in the engine room.
Technical data for Unit 300 wet ring suction below:
- A single position
- Suction flow rate: 300L/m
- Number of positions with 60% of alternation: 2
- Sound level: 52 dBA
- Contains solids separator.
- Electrical efficiency (kW) 0.45 - 0.58
- Voltage (V) 230 (1~)
- Frequency (Hz) 50
- With electronic control unit.
- Maximum depression: -37KPa
- Rotation speed: 2900 R.P.M.
- Size: 36cm x 50cm x 59cm
- Weight: 21kg
Amalgam Filter Separator
This amalgam separator filter is designed for use in conjunction with the Unit 300 wet ring suction unit. It is not an electrical product and therefore does not require any power supply. It is easy to install, for this purpose several accessories are included to suit every type of installation.
Analysis of technical data:
- Dimensions: 29 cm high x 25 cm in diameter
- Supplied with:
- Two meters of hose
- Four hose clips
- Two adapters (for universal drain)
- Two universal drain connectors
- Separation efficiency: 96.5%.
- Efficiency at maximum flow rate: 96.3%.
Main characteristics of the filter:
- Approval: EN ISO 11143:2002-12
- 100% recyclable
- Easy to adjust
- Small and compact
- No maintenance required
- No operating expenses
- Quiet
- Up to two years of use without needing to be recycled
